DIY Sunburst Deck Railing

Want to add pizzazz to an ordinary deck? This DIY tutorial will show you how to build a sunburst deck railing with step by step instructions, including materials. Take your home from ordinary to extraordinary!

Our front deck project totally changed the look of our 1950’s ranch style home. Before we just had a “stoop” and stairs. No curb appeal here!

The process involved taking down trees (which was totally controversial.) Over the years we were constantly approached with estimates to help save us from costly damage in case of a storm. Tree removal was definitely a necessary but unwanted expense.

We do feel more secure knowing there is no longer a danger to our home in a storm. 

The second step was the jack hammer demolition of the front stoop and stairs so that the deck could go right over the stoop itself. Removing all the bricks was a family affair and quite the task!

We had a contractor help build the decking and stairs using our ideas based on the amount of available space. We wanted the deck just big enough to add curb appeal yet not feel like a second house added on!

We wanted this addition to give us the outdoor space of our dreams and add some much needed curb appeal.

 My top priority was deck stairs that went straight to the front door, and that’s what I got!

Since I am a true southerner (born, bred and lived here most of my life) I treated the deck surface like a front porch and used it to welcome everyone with a casual and homey feel.  

My very favorite part? The clever sunburst DIY deck rail. It was quite the task but the addition of the design brought our vision to life!

Sunburst Deck Railing Installation

My ex husband was not a finish carpenter so some of the more complex designs were a little bit beyond his skill level.. After some research, he decided on a sunburst design. Just another instance where you don’t have to know it all if you’re willing to just try something new!

So much time was spent talking through options and researching what might work best for this space. I’m the visual person and I could see the deck railing design in my head. My ex husband was the one who worked out every detail and built the projects.

And……sometimes projects don’t work out in real life like they appeared on paper or in our heads! (Read on for the adjustments and reasons involved!)

You should always check your local building codes for specifics related to deck and railing code requirements before you design and build your deck.

1. Gather materials

• Cordless Drill
• Deck Screws
• Measuring Tape
• Hammer
• Circular Saw
• Pressure treated wood to fit your own specific design

2. Build panels for railing.

There are five panels approximately six feet wide and 38″ from the deck to the top rail. The horizontal mid-rails are only temporary.

Making individual panels, each on their own frame, would be a much easier build. Once complete, they would simply be inserted into the opening and attached to the posts with long screws.

This would also allow for easier maintenance down the road. The frames are 2″ x 4″ horizontals and raw pickets for the vertical and the sunburst rays.

 This is the initial round of what would be about 30 8′ pieces! Lots of work to be done!

3. Decide on design.

Experimenting with the design now, which would turn out to be non-compliant with local deck codes…but keep reading! The design that made the most sense was to go from center to each upper corner and then space everything else out in equal distances between those points.

Decorating Tips and Hacks

Get my FREE guide: How to decorate your home for practically nothing!

Send it now!

We hate spam. Unsubscribe at any time.

Roughing out the design gave me seven sunburst rays, which looked like a nice design.

4. Measure, mark and cut pickets and nail to frame.

First came the marking and cutting of each picket and then nailing it to the frame with 2-1/2″  at the same time.

I also pre-drilled every hole so that the wood would resist splitting.

Measure, mark, cut, repeat. Again, at this stage, I was just creating equal distances between each picket. 

And here is the first attempt! I chose to leave the more finished side facing the street and left a 3″ opening from the deck boards to the bottom of the design frame. This allows for debris to be blown off the deck under the rail.

5. How far apart do railing pickets need to be?

SURPRISE! The first design was out of compliance for spacing of railing pickets! They must be no further than 5″ at the widest point for safety reasons…don’t want a munchkin getting the noggin stuck.

SO, this called for a re-design. I would HIGHLY advise checking the code in your area first!

The second design allowed for compliance, spacing each picket no more than 4-1/2″ from its neighbor…that’s just how the spacing worked out for balance and symmetry. Again, measure, mark, cut, attach.

You can see here how each picket was left just a bit long.

6. Cut off pickets at edge of frame.

Once nailed, cut all the pickets off right at the edge of the frame. The only pickets that stayed in their original locations were the center and the two corners. Everything else adjusted to them.

7. Make adjustments as necessary.

Remember, measure twice…cut once! Some minor adjustments were made because each frame was not the exact same size as the other.

And here is the finished…and COMPLIANT… design! It is a bit more busy than we originally intended, but this design gives us substantially more privacy. So, we went from seven pickets to nineteen!

We have since established a flower bed with six beautiful red knock-out roses across the front. These should really soften the bottom part of the visual. 

Here is the finished project. You can see how the skirting was created with wood to hide everything underneath the deck. This would also get stained in a few months.

8. What are some other designs for deck railings?

There are many other options for deck railings including the standard vertical pickets, craftsman style, turned baluster and even wrought iron. Composite decking is awesome if you can afford it because it lasts so much longer. Your choices may be depending on budget and style. Take the time to research your options first!

So many things to decide and ways to build a sunburst deck railing! I love the way the railing is accentuated with the pops of color on the deck. 

Here’s a picture of it stained and decorated. What a difference!

Y’all come on by and set a spell!

More of our outdoor projects 

• Entire outdoor living category
• Tree removal
• Jackhammer demolition
• Dream deck reveal
• How to stain your wood deck
• Curb appeal with a front deck
• Wood deck restoration
• Backyard patio ideas

Print Pin

DIY Sunburst Deck Railing

Want to add pizzazz to an ordinary deck? This DIY tutorial will show you how to build a sunburst deck railing with step by step instructions, including materials. Take your home from ordinary to extraordinary!

Ingredients

• 1 Cordless drill
• Deck screws
• 1 Measuring tape
• 1 Hammer
• 1 Circular saw
• Pressure treated lumber

Instructions

• Gather materials.
• Build panels for railing.
• Decide on design.
• Measure, mark and cut pickets and nail to frame.
• How far apart do railing pickets need to be?
• Cut off pickets at edge of frame.
• Make adjustments as necessary.
• What are some other designs for deck railings?

Decorating Tips and Hacks

Get my FREE guide: How to decorate your home for practically nothing!

Send it now!

We hate spam. Unsubscribe at any time.